Ceramic fiber tape
Ceramic fiber ladder tape, ss wire reinforced
Item No.: WCT2L
Thickness: 2mm, 3mm, 5mm, 6mm
Weight: 880gsm, 1240gsm, 2000gsm
Width: 25mm - 200mm
Weave: plain, twill
Reinforcement: stainless steel wire
Temperature service up to 1260deg C
Weight: 880gsm, 1240gsm, 2000gsm
Width: 25mm - 200mm
Weave: plain, twill
Reinforcement: stainless steel wire
Temperature service up to 1260deg C
Description
- Ladder tape is made of wrap yarns missing in the center of tape, with just the weft yarns holding the remaining outside sections, give the tape looks like “ladder” and easy pass-thru over studs.
- Produced from an extremely pure alumina-silicate ceramic fiber
- An alternative to asbestos based textiles
- Used at 2300°F / 1260°C continuously, molts above 3000°F / 1650℃
- Available with a PSA (pressure sensitive adhesive) to facilitate easy installation
Common application of ladder tapes are used as gasket seal material on access doors for ovens, furnaces and kilns, where a gasket/seal is desired on both sides of the securing fasteners such as a bolt line. Ladder tape is also used on commercial kitchen exhaust duct flange joints as a sealing tape.
Specification
| 2300°F / 1260°C: Ceramic Fiber Ladder Tape | |||||
| Part number | Thickness(mm) | Width(mm) | Length(m) | Weight(g/m2) | Reinforcement |
| WCT120L | 2 | 20-200 | 30 | 880 | Glass |
| WCT220L | 2 | 20-200 | 30 | 880 | Steel |
| WCT130L | 3 | 20-200 | 30 | 1280 | Glass |
| WCT230L | 3 | 20-200 | 30 | 1280 | Steel |
| WCT150L | 5 | 20-200 | 30 | 2000 | Glass |
| WCT250L | 5 | 20-200 | 30 | 2000 | Steel |
| WCT160L | 6 | 20-200 | 30 | 2400 | Glass |
| WCT260L | 6 | 20-200 | 30 | 2400 | Steel |