Fiberglass tape
Graphite coated fiberglass tape
Item No.: WFT1G
Thickness: 0.8mm - 6mm
Weight: 600gsm - 4500gsm
Width: 15mm - 200mm
Length: 30m, 50m
Weave: plain
Graphite coated in black color
Texturized fiberglass
Temperature service up to 750deg C
Weight: 600gsm - 4500gsm
Width: 15mm - 200mm
Length: 30m, 50m
Weave: plain
Graphite coated in black color
Texturized fiberglass
Temperature service up to 750deg C
Description
Automotive Manifold, Header, Turbo & Exhaust Pipe Tape & Wrap
Constructed from a high temperature base fiberglass tape with graphite coating and heat treatment to clean the sizing and organic content.
Property:
► Ideal tape used to wrap manifold ,header, turbo and exhaust
► Used in places where no smokes allowed
► Highly flexible and minimal shrinkage
► Used at 750°C continuous, short time in 1000°C
Specification
WFT115G is the ideal thickness and most popular choice for Turbo& Exhaust wrap.
Fiberglass products are resistant to oils, solvents and most chemicals although contact with hydrofluoric acids, strong alkalis and live steam should be avoided.
Stainless Steel Free End Self Locking Clamps: Used to secure tape in place. Makes a neat low profile installation. (Standard hand tools can be used to tighten and cut the remaining free end)
· Size: 4.6mm W x 360mm L
Constructed from a high temperature base fiberglass tape with graphite coating and heat treatment to clean the sizing and organic content.
Property:
► Ideal tape used to wrap manifold ,header, turbo and exhaust
► Used in places where no smokes allowed
► Highly flexible and minimal shrinkage
► Used at 750°C continuous, short time in 1000°C
Manifold and header wrapping is widely accepted as standard practice for performance auto and racing applications. There are two reasons for this.
First, by adding an insulation layer around the exhaust gas piping, it keeps the temperature of the gas from dropping, which means the density of the gas is kept lower longer, and lower density means easier flow through the exhaust system. Easier flow means more horse power due to reduced back pressure. Retaining heat in the exhaust flow, resulting in faster exhaust gas flow, also results in higher turbo charger spool speeds, resulting in a gain of horse power.
Second,wrapping exhaust system components also reduces the temperature of other under-hood components and systems, reducing both radiated heat and convective heating of electrical components, intake air, fuel and hydraulic hoses. Reducing under-hood temperature also helps reduce hood paint thermal damage.
First, by adding an insulation layer around the exhaust gas piping, it keeps the temperature of the gas from dropping, which means the density of the gas is kept lower longer, and lower density means easier flow through the exhaust system. Easier flow means more horse power due to reduced back pressure. Retaining heat in the exhaust flow, resulting in faster exhaust gas flow, also results in higher turbo charger spool speeds, resulting in a gain of horse power.
Second,wrapping exhaust system components also reduces the temperature of other under-hood components and systems, reducing both radiated heat and convective heating of electrical components, intake air, fuel and hydraulic hoses. Reducing under-hood temperature also helps reduce hood paint thermal damage.
Specification
| 1000°F / 537°C: Graphite Coated Fiberglass Woven Tape | |||||
| Part number | Thickness (mm) |
Width (mm) |
Length (m) |
Weight (g/m2) |
Coating Weight (g/m2) |
| WFT110G | 1.0 | 20-200 | 30 | 800 | 64 |
| WFT115G | 1.5 | 20-200 | 30 | 1200 | 96 |
| WFT120G | 2.0 | 20-200 | 30 | 1400 | 112 |
| WFT125G | 2.5 | 20-200 | 30 | 1660 | 130 |
| WFT130G | 3.0 | 20-200 | 30 | 2000 | 160 |
| WFT150G | 5.0 | 20-200 | 30 | 3200 | 256 |
| WFT160G | 6.0 | 20-200 | 30 | 4000 | 320 |
WFT115G is the ideal thickness and most popular choice for Turbo& Exhaust wrap.
Fiberglass products are resistant to oils, solvents and most chemicals although contact with hydrofluoric acids, strong alkalis and live steam should be avoided.
Stainless Steel Free End Self Locking Clamps: Used to secure tape in place. Makes a neat low profile installation. (Standard hand tools can be used to tighten and cut the remaining free end)
· Size: 4.6mm W x 360mm L