Fiberglass sleeve
Reflective heat shield fiberglass sleeve
Item No.: WFSA
Diameter: 15mm - 300mm
Wall thickness: 0.4mm - 3mm
Aluminized fiberglass fabric slitted
Velcro closure with hook & loop style
Edge sewn style
Snap style
Reflective heat shield above 95% heat
Temperature service up to 550deg C
Wall thickness: 0.4mm - 3mm
Aluminized fiberglass fabric slitted
Velcro closure with hook & loop style
Edge sewn style
Snap style
Reflective heat shield above 95% heat
Temperature service up to 550deg C
Description
Constructed from a high temperature base filament/texturized fiberglass fabric which is then coated with highly reflective polished aluminum. The aluminum foil coating melts at 1220°F / 660°C, however it does take some time for the aluminum foil to absorb enough heat to melt, thereby it can withstand short exposure to the higher temperatures. The basic fiberglass fabric is 1000°F/537°C, while adhesive will burn-off or vaporize at temperatures above 300°F/148°C.
The sleeve is fabricated from a roll fabric, and is sewn with a double lock-stitch seam utilizing hightemperature Kevlar thread. The resulting sleeve has a teardrop or tadpole profile when viewed on-end;the width of the sewn tail is typically 6mm.
The sleeve is fabricated from a roll fabric, and is sewn with a double lock-stitch seam utilizing hightemperature Kevlar thread. The resulting sleeve has a teardrop or tadpole profile when viewed on-end;the width of the sewn tail is typically 6mm.